|
About Us
|
Steam has been a practical source of energy for the last three hundred years. For nearly 40 years Jordan Equipment has offered the MIH*Jet, which produces pressurized hot water and detergent. This hot detergent water is very effective and safe in the most demanding industrial environments. The MIH*Jet is intrinsically safe because it contains no moving parts. The only external power source is plant steam in a pressure range of 40 to 150 psig and water in a pressure range of 40 to 80 psig with a minimum flow rate of 250 gph. The MIH*Jet converts heat energy of steam into kinetic energy of water and steam as they are mixed and forced through a venturi system within the jet body. At the lance nozzle outlet the MIH*Jet is able to produce pressurized hot water mixed with a liquid cleaner or detergent (if so desired) at a pressure of approximately 2.3 times the inlet steam pressure and at a temperature of approximately 185°F. The MIH*Jet can accommodate a wide range of steam pressures and flow capacities from 250 gph up to 1,250 gph. Plant water pressure is not a determining factor for the use of the MIH*Jet as long as the flow capacity is sufficient. The MIH*Jet is easy and safe to operate. Operation is as simple as opening and adjusting the water and steam valves for a quick and efficient clean-up. No pumps, motors, or moving parts to worry with or maintain; just open and close the steam and water valves. We can furnish you with an entire system including MIH*Jet, hose, lance, a variety of nozzles and a hose reel for safe operation and storage. OUR SYSTEM SHOULD NOT BE OPERATED WITHOUT FOLLOWING THE INSTALLATION AND OPERATING INSTRUCTIONS FOR THIS EQUIPMENT. |
|
| Format for Print |